混凝土结构预应力筋分批张拉过程中张力的仿真分析

作者：季振祥

单位：中交第三航务工程局有限公司

关键词：预应力混凝土  分批张拉  数值模拟

分类号：TU378.1

出版年,卷(期):页码：2008,32(4):12-13

摘要：

工程施工中常用分批张拉法把结构中预应力筋分别张拉到各自的设计张力值。针对分批张拉施工技术,提出了可以求解预应力筋的施工控制张拉力的计算方法,使得每根预应力筋张拉一次即可,无需反复调整张拉力,而且还能根据不同张拉顺序的方案,计算出张拉顺序对构件应力和变形的影响。可应用于预应力施工方案的优化设计。

It is general to stretch all the prestressed steel bars to their designed tensions by using a multistage tensioning construction method.With regard to the construction method of tensioning in sequence,a new method is proposed in the paper to calculate the control tensile force of prestressed steel bars.All the prestressed steel bars can be tensioned to the design tension value at one go if each bar is tensioned to its construction control tensile force as calculated with this method.The influence of the tensioning sequence on stress and deformation of members can be worked out according to different tensioning schemes.The method can be used to optimize the tensioning sequence.

基金项目：

作者简介：

参考文献：

[1]蒋元海.关于管桩结构设计中预应力损失计算问题的探讨[J].混凝土与水泥制品,2001,(1)26-27. [2]徐有邻,宇秉训,姜红.三股钢绞线基本性能的试验研究[J].工业建筑,1998,28(9):31-36. [3]田英辉,赵瑜,闫澍旺,刘力伟,程栋栋.基于ANSYS的预应力筋张拉顺序数值模拟及优化[J].东南大学学报,2005,35(7):124-128.

服务与反馈：

【文章下载】【加入收藏】